Steel for six industries
Petrochemical, construction, food and medical, marine, machinery and kitchenware. Each industry specifies grade, form and finish differently, and the grade conversation should happen before the price conversation.
Petrochemical and chemical processing
Process piping, heat exchangers and vessels need material that holds up to chlorides, acids and elevated temperature at the same time. We supply 316L and 321 pipe, 904L plate and 15CrMo/12Cr1MoV pressure-grade plate for this sector.
Materials and grades
- 316L
- 321
- 904L
- 15CrMo
- 12Cr1MoV
Typical parts
- Heat exchanger tube and shell
- Process piping spools
- Storage tank shells
- Reactor and vessel plate
Construction and infrastructure
Structural frames, roofing and cladding consume carbon, galvanized and stainless steel in large volumes. Section, plate and coil are supplied to the structural grade named on the drawing, with mill certificates traceable to the heat number.
Materials and grades
- Q235B
- Q345B
- SS400
- DX51D+Z
- 304
Typical parts
- Structural plate and section
- Galvanized roofing and cladding coil
- Stainless handrail and cladding
- Anchor and connection plate
Food, beverage and medical
Hygienic equipment needs a surface that can be cleaned and a grade that does not contaminate the product. 304 and 316L in 2B and BA finish are the standard selections for tanks, work surfaces, conveyors and medical furniture.
Materials and grades
- 304
- 304L
- 316L
Typical parts
- Tanks and vessels
- Work tables and sinks
- Conveyor and chute liners
- Medical and laboratory furniture
Marine and offshore
Salt water exposure rules out standard 304 for long-life fittings. 316L, 904L copper-nickel tube and 5052 aluminium cover deck hardware, piping and hull and superstructure work where chloride resistance is the deciding factor.
Materials and grades
- 316L
- 904L
- C70600
- 5052
Typical parts
- Deck fittings and railings
- Sea water piping
- Heat exchanger tube
- Hull and superstructure panel
Machinery and automotive
Machines and vehicles need consistent hardenability, fatigue resistance and dimensional accuracy. Alloy bar in 4140/42CrMo, 20CrMnTi and 40Cr covers shafts, gears and structural parts, with Q&T condition quoted against a stated hardness range.
Materials and grades
- 4140 / 42CrMo
- 40Cr
- 20CrMnTi
- 65Mn
- Q345B
Typical parts
- Shafts and spindles
- Gears and couplings
- Chassis and bracket plate
- Spring and clip strip
Kitchenware and appliances
Deep-drawn sinks, cookware and appliance panels depend on consistent forming behaviour and a surface that survives polishing. 304 and 305 coil in 2B, BA and No.4 finish are supplied to coil width and temper for the press line.
Materials and grades
- 304
- 305
- 430
- 316L
Typical parts
- Sinks and cookware shells
- Appliance front panels
- Cutlery and flatware
- Commercial kitchen surfaces
Need a grade recommendation?
Describe the environment — temperature, medium, whether it is welded, and whether appearance matters — and we will narrow the grade list before quoting.
- Four questions usually reduce the list to one or two grades
- Free samples before a production order
- Mill certificate with every shipment