ISO certified · CE certified · 5,000 t annual export capacity sdsteel@chunkang.ltd · +86 147 6353 9656
Definition

What carbon steel is used for

Carbon steel is the default structural and fabrication material: predictable welding behaviour, wide availability and the lowest cost per tonne of the families on this site. The grade controls strength and weldability, so structural work usually specifies A36, SS400, S235JR or Q235B, while pressure and machinery parts move to Q345B, S355JR or a dedicated pipe grade.

Forms available: Plate / sheet · Coil / strip · Pipe / tube. Other forms and tempers are quoted on request against your drawing or standard reference.

Large-diameter carbon steel pipes stacked at the yard
Carbon steel in stock at the Liaocheng facility.
Grades

Carbon steel grades and equivalents

Cross-references for the grades quoted most often. Equivalent designations are close but not always identical in chemistry, so a specification should always name the standard it is written against.

Table 1 — Carbon steel grades quoted, with UNS and EN cross-references
GradeUNS / AISIEN designationForms
Q235B—S235JR (approx.)Plate, coil, pipe
Q345B—S355JR (approx.)Plate, coil, pipe
SS400—JIS G3101Plate, coil, pipe
A36—ASTM A36Plate, coil
20# / 45#—GB/T 699Pipe, bar, plate

Other grades in this family are available on request. If your specification names a standard not listed here, send it and we will confirm availability and lead time.

Forms

Product forms available

The same grade behaves differently depending on how it is rolled, drawn or cut. Specify the form, the size and the condition together.

Plate / sheet

Carbon steel plate / sheet supplied to the grade, size and condition stated on your order.

Coil / strip

Carbon steel coil / strip supplied to the grade, size and condition stated on your order.

Pipe / tube

Carbon steel pipe / tube supplied to the grade, size and condition stated on your order.

Bar / rod

Carbon steel bar / rod supplied to the grade, size and condition stated on your order.

Profile

Carbon steel profile supplied to the grade, size and condition stated on your order.

Specification pages in this family

Specification

What to send with an inquiry

Table 2 — Specification fields required for a firm quotation
GradeTrade number, UNS or EN designation, and the standard it is specified against
FormPlate, sheet, coil, strip, pipe, tube, bar, rod or profile
Thickness / wallNominal value with tolerance class if the application is critical
Width / diameterMill width or slit width; outside diameter for pipe and bar
LengthRandom, fixed or cut to length
SurfaceHot rolled, pickled and oiled, Hot rolled, black, Cold rolled, Galvanized on request
QuantityTonnes, pieces or coils, with the unit stated
CertificationEN 10204 3.1 mill certificate, third-party inspection, PMI
PackingPallet, case, bundle, interleaving, marking and shipping marks

Delivery is normally 7–15 days. Exceptional tonnages or special specifications take longer, and the confirmed date is stated on the quotation.

Finishes and applications

Surface finishes and typical use

Finishes quoted

  • Hot rolled, pickled and oiled
  • Hot rolled, black
  • Cold rolled
  • Galvanized on request

Finish is a process, not a colour. Where appearance or cleanability is regulated, state the finish by its standard designation and, for polished work, the roughness value.

How finishes are specified

Typical applications

  • Construction
  • Machinery
  • Petrochemical
  • Shipbuilding
  • General fabrication
See all applications

Carbon steel questions buyers ask

Is Q235B equivalent to S235JR?

They are close but not identical: both are structural grades with a 235 MPa minimum yield, and they are commonly substituted for each other in general fabrication. The chemical limits and impact-testing requirements differ, so confirm the substitution against your project specification before ordering.

Do you supply carbon steel with a mill test certificate?

Yes. Mill test certificates are issued with the shipment, and third-party inspection can be arranged before dispatch if your project requires it.

Send a specification

Grade, form, size, finish and quantity is enough for a firm quotation.

No. 8 Taishan Road, Development Zone, Liaocheng, Shandong, China
Request a quote

Other material families

Compare grades across stainless, copper, aluminium, carbon, galvanized and alloy steel.

WhatsApp Email Call