ISO certified · CE certified · 5,000 t annual export capacity sdsteel@chunkang.ltd · +86 147 6353 9656
Definition

What copper is used for

Copper is specified where electrical and thermal conductivity matter more than strength: heat exchangers, refrigeration circuits, busbars, roofing and architectural work. Oxygen-free and phosphorus-deoxidised grades behave differently under brazing and welding, so the temper and grade are quoted together with the form.

Forms available: Tube / pipe · Plate / sheet · Strip / coil · Bar. Other forms and tempers are quoted on request against your drawing or standard reference.

Bundles of copper tubes stacked in the warehouse
Copper in stock at the Liaocheng facility.
Grades

Copper grades and equivalents

Cross-references for the grades quoted most often. Equivalent designations are close but not always identical in chemistry, so a specification should always name the standard it is written against.

Table 1 — Copper grades quoted, with UNS and EN cross-references
GradeUNS / AISIEN designationForms
C11000 (ETP)C11000Cu-ETPPlate, strip, bar, busbar
C12200 (DHP)C12200Cu-DHPTube, plate, strip
C12000 (DLP)C12000Cu-DLPTube, plate
C70600 (90/10 Cu-Ni)C70600CuNi10Fe1MnTube, plate

Other grades in this family are available on request. If your specification names a standard not listed here, send it and we will confirm availability and lead time.

Forms

Product forms available

The same grade behaves differently depending on how it is rolled, drawn or cut. Specify the form, the size and the condition together.

Plate / sheet

Copper plate / sheet supplied to the grade, size and condition stated on your order.

Coil / strip

Copper coil / strip supplied to the grade, size and condition stated on your order.

Pipe / tube

Copper pipe / tube supplied to the grade, size and condition stated on your order.

Bar / rod

Copper bar / rod supplied to the grade, size and condition stated on your order.

Profile

Copper profile supplied to the grade, size and condition stated on your order.

Specification pages in this family

Specification

What to send with an inquiry

Table 2 — Specification fields required for a firm quotation
GradeTrade number, UNS or EN designation, and the standard it is specified against
FormPlate, sheet, coil, strip, pipe, tube, bar, rod or profile
Thickness / wallNominal value with tolerance class if the application is critical
Width / diameterMill width or slit width; outside diameter for pipe and bar
LengthRandom, fixed or cut to length
SurfaceMill finish, Bright annealed, Pickled, Oxygen-free (OF)
QuantityTonnes, pieces or coils, with the unit stated
CertificationEN 10204 3.1 mill certificate, third-party inspection, PMI
PackingPallet, case, bundle, interleaving, marking and shipping marks

Delivery is normally 7–15 days. Exceptional tonnages or special specifications take longer, and the confirmed date is stated on the quotation.

Finishes and applications

Surface finishes and typical use

Finishes quoted

  • Mill finish
  • Bright annealed
  • Pickled
  • Oxygen-free (OF)

Finish is a process, not a colour. Where appearance or cleanability is regulated, state the finish by its standard designation and, for polished work, the roughness value.

How finishes are specified

Typical applications

  • HVAC and refrigeration
  • Heat exchange
  • Electrical
  • Architectural
  • Marine
See all applications

Copper questions buyers ask

What is the difference between C11000 and C12200 copper?

C11000 is electrolytic tough pitch copper with very high conductivity, used for busbars and electrical strip. C12200 is phosphorus-deoxidised copper, which brazes and welds more reliably and is the usual choice for refrigeration and plumbing tube.

Do you supply copper tube to EN 12735?

Yes — refrigeration and air-conditioning tube is quoted to DIN 8905 and EN 12735 T1/T2, in plain condition, made from 99.9% copper, blank inside, clean and dry. Other standards can be quoted on request.

Can copper tube be supplied in coils or straight lengths?

Both. Pancake coils are standard for refrigeration work and straight lengths in hard temper for construction and industrial piping. State the outer diameter, wall thickness, temper and length when you inquire.

Send a specification

Grade, form, size, finish and quantity is enough for a firm quotation.

No. 8 Taishan Road, Development Zone, Liaocheng, Shandong, China
Request a quote

Other material families

Compare grades across stainless, copper, aluminium, carbon, galvanized and alloy steel.

WhatsApp Email Call