Galvanized steel: sheet, coil and pipe
Hot-dip galvanized sheet, coil and pipe in DX51D+Z, SGCC and S350GD+Z with zinc coatings for roofing, ducting, structure and outdoor fabrication.
What galvanized steel is used for
Galvanized steel is carbon steel protected by a hot-dip zinc layer that sacrifices itself before the base metal corrodes. Coating mass — expressed as Z120, Z275 and similar designations — decides service life far more than sheet thickness, so the coating specification belongs next to the grade on every inquiry.
Forms available: Plate / sheet · Coil / strip · Pipe / tube. Other forms and tempers are quoted on request against your drawing or standard reference.
Galvanized steel grades and equivalents
Cross-references for the grades quoted most often. Equivalent designations are close but not always identical in chemistry, so a specification should always name the standard it is written against.
| Grade | UNS / AISI | EN designation | Forms |
|---|---|---|---|
| DX51D+Z | — | EN 10346 | Sheet, coil |
| SGCC | — | JIS G3302 | Sheet, coil |
| S350GD+Z | — | EN 10346 | Sheet, coil |
| Z120 / Z275 coating | — | EN 10346 | Sheet, coil |
Other grades in this family are available on request. If your specification names a standard not listed here, send it and we will confirm availability and lead time.
Product forms available
The same grade behaves differently depending on how it is rolled, drawn or cut. Specify the form, the size and the condition together.
Plate / sheet
Galvanized steel plate / sheet supplied to the grade, size and condition stated on your order.
Coil / strip
Galvanized steel coil / strip supplied to the grade, size and condition stated on your order.
Pipe / tube
Galvanized steel pipe / tube supplied to the grade, size and condition stated on your order.
Bar / rod
Galvanized steel bar / rod supplied to the grade, size and condition stated on your order.
Profile
Galvanized steel profile supplied to the grade, size and condition stated on your order.
Specification pages in this family
What to send with an inquiry
| Grade | Trade number, UNS or EN designation, and the standard it is specified against |
|---|---|
| Form | Plate, sheet, coil, strip, pipe, tube, bar, rod or profile |
| Thickness / wall | Nominal value with tolerance class if the application is critical |
| Width / diameter | Mill width or slit width; outside diameter for pipe and bar |
| Length | Random, fixed or cut to length |
| Surface | Regular spangle, Skin-passed, Chromate passivated, Oiled, Colour coated on request |
| Quantity | Tonnes, pieces or coils, with the unit stated |
| Certification | EN 10204 3.1 mill certificate, third-party inspection, PMI |
| Packing | Pallet, case, bundle, interleaving, marking and shipping marks |
Delivery is normally 7–15 days. Exceptional tonnages or special specifications take longer, and the confirmed date is stated on the quotation.
Surface finishes and typical use
Finishes quoted
- Regular spangle
- Skin-passed
- Chromate passivated
- Oiled
- Colour coated on request
Finish is a process, not a colour. Where appearance or cleanability is regulated, state the finish by its standard designation and, for polished work, the roughness value.
How finishes are specifiedTypical applications
- Roofing and cladding
- HVAC ducting
- Construction
- Agriculture
- Appliances
Galvanized steel questions buyers ask
What does Z275 mean on galvanized steel?
The number is the total zinc coating mass in grams per square metre, measured on both sides. Z275 gives roughly twice the coating of Z120, so it lasts considerably longer outdoors or in humid service.
Will galvanized sheet rust at cut edges?
Cut edges are unprotected, but the zinc around them corrodes sacrificially and protects a small exposed area. For long-life outdoor work, cut edges should be sealed or the part should be post-galvanized.
Send a specification
Grade, form, size, finish and quantity is enough for a firm quotation.
Other material families
Compare grades across stainless, copper, aluminium, carbon, galvanized and alloy steel.