ISO certified · CE certified · 5,000 t annual export capacity sdsteel@chunkang.ltd · +86 147 6353 9656
Definition

What alloy steel is used for

Alloy steel adds chromium, molybdenum, manganese or nickel to carbon steel to raise hardenability, strength at temperature or wear resistance. The trade-off is heat treatment: 4140 needs quench and temper to reach its properties, 15CrMo and 12Cr1MoV are specified for pressure parts at temperature, and 20CrMnTi is a case-hardening gear steel.

Forms available: Plate / sheet · Bar / rod · Pipe / tube. Other forms and tempers are quoted on request against your drawing or standard reference.

Bundles of alloy steel round bars on the factory floor
Alloy steel in stock at the Liaocheng facility.
Grades

Alloy steel grades and equivalents

Cross-references for the grades quoted most often. Equivalent designations are close but not always identical in chemistry, so a specification should always name the standard it is written against.

Table 1 — Alloy steel grades quoted, with UNS and EN cross-references
GradeUNS / AISIEN designationForms
42CrMo / 4140G414001.7225Plate, bar
40Cr—1.7035 (approx.)Bar, plate
20CrMnTi——Bar
15CrMo—1.7335 (approx.)Plate, pipe
12Cr1MoV——Plate, pipe
65Mn—1.1248 (approx.)Strip, bar

Other grades in this family are available on request. If your specification names a standard not listed here, send it and we will confirm availability and lead time.

Forms

Product forms available

The same grade behaves differently depending on how it is rolled, drawn or cut. Specify the form, the size and the condition together.

Plate / sheet

Alloy steel plate / sheet supplied to the grade, size and condition stated on your order.

Coil / strip

Alloy steel coil / strip supplied to the grade, size and condition stated on your order.

Pipe / tube

Alloy steel pipe / tube supplied to the grade, size and condition stated on your order.

Bar / rod

Alloy steel bar / rod supplied to the grade, size and condition stated on your order.

Profile

Alloy steel profile supplied to the grade, size and condition stated on your order.

Specification pages in this family

Specification

What to send with an inquiry

Table 2 — Specification fields required for a firm quotation
GradeTrade number, UNS or EN designation, and the standard it is specified against
FormPlate, sheet, coil, strip, pipe, tube, bar, rod or profile
Thickness / wallNominal value with tolerance class if the application is critical
Width / diameterMill width or slit width; outside diameter for pipe and bar
LengthRandom, fixed or cut to length
SurfaceHot rolled, Annealed, Quenched and tempered on request, Normalised
QuantityTonnes, pieces or coils, with the unit stated
CertificationEN 10204 3.1 mill certificate, third-party inspection, PMI
PackingPallet, case, bundle, interleaving, marking and shipping marks

Delivery is normally 7–15 days. Exceptional tonnages or special specifications take longer, and the confirmed date is stated on the quotation.

Finishes and applications

Surface finishes and typical use

Finishes quoted

  • Hot rolled
  • Annealed
  • Quenched and tempered on request
  • Normalised

Finish is a process, not a colour. Where appearance or cleanability is regulated, state the finish by its standard designation and, for polished work, the roughness value.

How finishes are specified

Typical applications

  • Machinery
  • Gears and shafts
  • Pressure equipment
  • Tooling
  • Springs
See all applications

Alloy steel questions buyers ask

Can you supply 4140 in the quenched and tempered condition?

Quenched and tempered 4140 can be quoted on request, with the required hardness range stated on the order. Annealed or hot-rolled condition is the standard supply for stock plate and bar.

What is 42CrMo equivalent to?

42CrMo is the Chinese GB designation most often cross-referenced to AISI 4140 and EN 1.7225. The three are close but not identical in chemistry, so a project specification should always name the standard it is written against.

Send a specification

Grade, form, size, finish and quantity is enough for a firm quotation.

No. 8 Taishan Road, Development Zone, Liaocheng, Shandong, China
Request a quote

Other material families

Compare grades across stainless, copper, aluminium, carbon, galvanized and alloy steel.

WhatsApp Email Call