ISO certified · CE certified · 5,000 t annual export capacity sdsteel@chunkang.ltd · +86 147 6353 9656
Material family 01

Stainless steel

Stainless steel is a chromium-alloyed steel with a passive surface layer that resists corrosion in acids, alkaline gases and solutions. It is not rust-free in every environment, which is why grade selection matters: 304 covers general indoor and food-contact work, 316L adds molybdenum for chlorides, 321 and 310S take heat, and 904L handles aggressive chemical service.

  • 304 / 304L
  • 316 / 316L
  • 321
  • 310S
  • 347
  • 904L
  • 301 / 302 / 305

Forms available: Plate / sheet · Coil / strip · Pipe / tube · Bar / rod · Profile

Material family 02

Copper

Copper is specified where electrical and thermal conductivity matter more than strength: heat exchangers, refrigeration circuits, busbars, roofing and architectural work. Oxygen-free and phosphorus-deoxidised grades behave differently under brazing and welding, so the temper and grade are quoted together with the form.

  • C11000 (ETP)
  • C12200 (DHP)
  • C12000 (DLP)
  • C70600 (90/10 Cu-Ni)

Forms available: Tube / pipe · Plate / sheet · Strip / coil · Bar

Material family 03

Aluminium

Aluminium is chosen for its strength-to-weight ratio and its natural oxide layer. The alloy series decides the rest: 1xxx is commercially pure and highly conductive, 3xxx is a general-purpose manganese alloy, 5xxx is marine-grade magnesium alloy, and 6xxx is heat-treatable structural extrusion stock.

  • 1050 / 1060
  • 1100
  • 3003
  • 5052
  • 6061
  • 6063

Forms available: Plate / sheet · Coil · Pipe / tube · Bar / profile

Material family 04

Carbon steel

Carbon steel is the default structural and fabrication material: predictable welding behaviour, wide availability and the lowest cost per tonne of the families on this site. The grade controls strength and weldability, so structural work usually specifies A36, SS400, S235JR or Q235B, while pressure and machinery parts move to Q345B, S355JR or a dedicated pipe grade.

  • Q235B
  • Q345B
  • SS400
  • A36
  • 20# / 45#

Forms available: Plate / sheet · Coil / strip · Pipe / tube

Material family 05

Galvanized steel

Galvanized steel is carbon steel protected by a hot-dip zinc layer that sacrifices itself before the base metal corrodes. Coating mass — expressed as Z120, Z275 and similar designations — decides service life far more than sheet thickness, so the coating specification belongs next to the grade on every inquiry.

  • DX51D+Z
  • SGCC
  • S350GD+Z
  • Z120 / Z275 coating

Forms available: Plate / sheet · Coil / strip · Pipe / tube

Material family 06

Alloy steel

Alloy steel adds chromium, molybdenum, manganese or nickel to carbon steel to raise hardenability, strength at temperature or wear resistance. The trade-off is heat treatment: 4140 needs quench and temper to reach its properties, 15CrMo and 12Cr1MoV are specified for pressure parts at temperature, and 20CrMnTi is a case-hardening gear steel.

  • 42CrMo / 4140
  • 40Cr
  • 20CrMnTi
  • 15CrMo
  • 12Cr1MoV
  • 65Mn

Forms available: Plate / sheet · Bar / rod · Pipe / tube

Can't find your grade?

Non-standard grades, sizes and tempers are quoted against your drawing or standard reference.

Send a specification
WhatsApp Email Call