316L stainless steel coil and strip (UNS S31603)
316L (UNS S31603, EN 1.4404) adds 2–3% molybdenum to the 18/8 base, raising resistance to pitting and crevice corrosion in chlorides. Supplied as cold-rolled coil and slit strip for stamping, roll forming, tube welding and architectural panels.
- Grade
- 316L
- Molybdenum
- 2.00–3.00%
- Finish
- 2B, BA, No.4, HL
- Lead time
- 7–15 days
316L specification summary
| Grade | 316L (UNS S31603) |
|---|---|
| European designation | EN 1.4404 |
| Japanese designation | SUS316L |
| Product standard | ASTM A240/A240M, EN 10088-2 |
| Form supplied | Cold-rolled coil, slit strip, cut sheet |
| Typical thickness range | 0.3–3.0 mm |
| Typical coil width | 1000 / 1219 / 1500 mm; slit to width on request |
| Coil inner diameter | 508 mm, on request |
| Surface finish | 2B, BA, No.4, hairline |
| Certification | EN 10204 3.1 mill test certificate with each shipment |
| Packaging | Eye-to-sky or eye-to-wall, strapped, edge-protected |
Typical ranges are shown for guidance. Confirm the exact thickness, width, length and tolerance on the quotation before ordering; the mill certificate that arrives with the goods states the values actually supplied.
Chemical composition
| Grade | C max | Mn max | P max | S max | Si max | Cr | Ni | Mo | N max |
|---|---|---|---|---|---|---|---|---|---|
| 316L | 0.030 | 2.00 | 0.045 | 0.030 | 0.75 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | 0.10 |
Values are standard limits for the designation, not a statement about a specific heat. The mill certificate states the measured composition of the material supplied.
Mechanical properties
| Grade | Tensile strength, min | Yield strength 0.2%, min | Elongation in 50 mm, min | Hardness, max |
|---|---|---|---|---|
| 316L | 485 MPa | 170 MPa | 40% | 217 HBW |
Available finishes
| 2B | Cold rolled, annealed, pickled and skin-passed. Standard for roll forming and stamping. |
|---|---|
| BA | Bright annealed for a reflective surface without further polishing. |
| No.4 / HL | Polished or brushed after coil processing, usually for visible panels. |
Applications
- Chemical and pharmaceutical equipment
- Marine and coastal hardware
- Food processing lines
- Welded tube production
- Architectural panel systems
Quality documents
Every shipment includes an EN 10204 3.1 mill test certificate stating the heat number, chemical composition and mechanical properties. PMI and third-party pre-shipment inspection are available on request.
How quality is controlled316L questions
Why choose 316L over 304 for coastal sites?
The molybdenum in 316L improves resistance to pitting and crevice corrosion in chloride environments. In practice, 316L is specified for splash zones, swimming pool areas, marine hardware and de-icing salt exposure where 304 would stain or pit.
Can 316L coil be slit to my width?
Yes. Slit strip is supplied to the width required for your roll forming or stamping line, with burr limits agreed on the order because burr height affects downstream tooling.
Is 316L suitable for welded tube?
The low carbon content of 316L is specifically intended to reduce carbide precipitation in the weld heat-affected zone, which makes it the normal selection for welded tube and pipe that will not be solution-annealed after welding.
Packing and loading
- Export packing to the method stated on the quotation
- Marking with grade, size, heat number and order reference
- Moisture protection for sea freight
- Loading photographs supplied before departure
Related products
304 / 304L
304 (UNS S30400, EN 1.4301) is the most widely used austenitic stainless steel: 18% chromium, 8% nickel, non-magnetic in the annealed condition and suitable for food-contact, architectural and general fabrication.
View specifications
321
321 (UNS S32100, EN 1.4541) is a titanium-stabilised austenitic grade that resists intergranular corrosion after welding and performs in continuous service up to about 870 °C.
View specifications
C12200
Refrigeration and air-conditioning copper tube made to DIN 8905 and EN 12735 T1/T2 from 99.9% copper, blank inside, clean and dry — supplied in pancake coils and straight lengths in soft, half-hard and hard temper..
View specificationsNeed this grade in another form?
316L is also supplied in the other forms listed for stainless steel.